Unboxing and Initial Set-UpUpdated 3 months ago
Setting Up Your Device
Welcome to the beginning of your projection mapping experience with Luxedo! We've made the journey of getting your device set-up as easily as possible, so just follow these guides step-by-step and you should be well on your way to creating your first show!
Installing the device power supply
When your new V3 Projection System arrives, the power supply for the projector will have to be connected.
1. When unboxing your device locate the power supply for your device. This is usually kept on the side of the device case during shipment.
2. With the power supply located, open your device and begin plugging it into the projector. On the inside of the device casing there is a 3 pronged cable that should be plugged into the power supply as pictured. Then plug the cable from the power supply into the projector in the hole labeled "DC".
3. With the power supply now installed, position it neatly inside the device casing and secure the latch.
4. Your device is now ready to be plugged in and positioned to continue setup.
